Use the Laser cutter on the sealed door and eventually you’ll cut out a hole that you can pass through. You’ll see a message saying Sealed door – Cut to Open. If you come across a burnt-looking door, approach it. Make sure to bring the Laser Cutter on any trip where you may be exploring wreckage.
In addition to the 2x Diamonds you’ll also need 1x Battery, 1x Titanium, and 1x Cave Sulfur to fabricate the Laser Cutter. the ice wall in the water near the landing at robotics lab is a shortcut to get back home after you managed to find the proper entrance to that area. The easiest way to obtain the needed Diamonds, however, is to visit the Mountain Island where the Shale Outcrops can be harvested from the cave walls. there is only one directional ice wall and you need to cut it from the inside later. Most of the areas where Shale Outcrops can be found are beyond your Seamoth’s current depth limit of 200m, but you can swim deeper without it. Diamonds can only be obtained by breaking Shale Outcrops. You need 2x Diamond in order to fabricate the Laser Cutter. They can be found frequently in crates on the seabed in the Grassy Plateaus biome.Īlso if you’ve already explored the large wreck near Lifepod 17 then you almost certainly have found enough Laser Cutter fragments to fabricate the blueprint. In order to fabricate the Laser Cutter blueprint you’ll need to scan 3 Laser Cutter fragments.
We were able to get through the large wreck near Lifepod 17 without it, but the Laser Cutter will be required for our next large wreck exploration.
The Laser Cutter in Subnautica has only one purpose: Cutting holes in Sealed Doors, in the wreckage of the Aurora.
0 kommentar(er)
